
Automatic Industry Motor Rotor Die Casting Machine
Model number:ND-100TF
Introduction:The automatic aluminum rotor die casting machines are highly automated and can produce large quantities of high-quality rotors with consistent quality and dimensional accuracy.
- Specification
Automatic Industry Motor Rotor Die Casting Machine
Automatic aluminum rotor die casting machines are used in a variety of industries, including automotive, aerospace, electric motors , generators and industrial manufacturing, etc. Rotor die casting machines allows for the production of rotors with precise dimensions, high strength, and excellent mechanical properties. This makes them suitable for use in demanding applications where reliability and performance are critical.
Our aluminum rotor die casting machines are highly automated and can produce large quantities of high-quality rotors with consistent quality and dimensional accuracy. High-quality, and cost-effective aluminum rotors will make them a critical component of the manufacturing process in many industries.
The automatic aluminum rotor die casting machine typically consists of a furnace for melting the metal, a holding furnace for maintaining the molten metal at a constant temperature, a die-casting machine for injecting the molten metal into the mold, and a cooling system for solidifying the metal once it has been cast.
The process of rotor die casting typically involves the following steps:
Melting the metal: The metal to be cast is melted in the furnace, usually using electricity or natural gas as a heat source.
Injecting the metal: Once the metal is melted, it is injected into the mold using the die-casting machine. The mold is typically made of steel and is designed to create the desired shape of the rotor.
Cooling the metal: Once the metal has been injected into the mold, it is allowed to cool and solidify. The cooling process is usually done using a water-based cooling system, which helps to speed up the solidification process.
Removing the finished rotor: Once the metal has solidified, the mold is opened and the finished rotor is removed.
Rotor Die Casting Machine Application
Automotive industry: Rotor die casting machines are used to produce rotors for electric motors in hybrid and electric vehicles. These rotors are typically made of aluminum or copper and require high precision and consistency to meet the stringent requirements of the automotive industry.
Aerospace industry: Rotor die casting machines are used to produce rotors for electric motors used in aerospace applications, such as fans, pumps, and actuators. These rotors are typically made of high-strength materials, such as titanium or nickel-based alloys, and require tight tolerances and dimensional accuracy.
Industrial manufacturing: Rotor die casting machines are used to produce rotors for a variety of industrial applications, such as pumps, compressors, and power tools. These rotors are made from a range of materials, including aluminum, copper, and steel, and require high precision and consistency to meet the demands of industrial manufacturing.
Rotor Die Casting Machine specification
1、Main cylinder: 1main cylinder mold lock forceKN500
2main cylinder mold lock travel mm400
2、Injecting cylinder: 1Injecting cyliner travel mm150
2Injecting cylinder injecting force KN300
3Injecting force(Min-Max)KN70-300
4capacityL20
5aluminum depot OD(Max)mm75-90
6punching head OD(Max)mm75-90
7aluminum depot capacity(Max)kg1.8
8Injection punching head travel distancemm55
9cycle times15-20
10Rotor ODmmMax 85
11Rotor stack heightmmMax 90
3、Motor and pump: 1Pump motor powerKW7.5
2Divider motor powderKW0.75
3Oil pump (plunger pump)L40Y
4、Machine dimesion: 1Main frame(L*W*G)mm1800*1800*2500
2assembly of oil tank and electric appliance(L*W*G)mm1500*1000*900
3turntable ODmm1000
5、Cooling pump specification: 1Submersible pump powerKW1.5
2Submersible pump rate of flowM3/H5
3Submersible pump water pressureMPa0.4
Remark: the max pressure of this machine is 25Mpa / Submersible pump power 220/380V Optiona This rotor automatic centrifugal aluminum casting machine adopts four-station casting to improve production efficiency.
About Motor armature manufacturing
Motor armature / rotor manufacturing production assembly line including: shaft pressing machine, end cover pressing machine, commutator pressing machine, armature insulation paper inserting machine, armature winding machine, commutator hot stacking machine, armature wedge inserting machine and armature testing machine, ball bearing inserting machine, and worm shaft inserting, NIDE can supply and manufacture about then ,and all the process will be done by machine automatically. Operator only needs to do loading and unloading.
About NIDE
Nide is to provide different kinds of motor manufacturing machinery, including stand along machine, fully-auto complete line for armature and stator production, and the motor assembly line.We can supply the full range of motor components such as commutator, ball bearing, carbon brush, insulation paper, shaft, magnet, fan, motor cover,etc.We also provide technical support and consulting, project support and turn-key service for some motor manufacturing.
Our machine's application
Our machines are mainly applied to induction motors, BLDC motor, universal motor, three phase motor, single phase motor, AC motor, DC motor, such as washing machine motor, air conditioner motor, pump motor, cooler motor, alternator motor, fan motor, ceiling fan motor, compressor motor, power tool motor, vacuum cleaner motor, mixer motor, series motor, electrical car motor, wheel hub motor, electric toothbrush motor, hair dryer motor, electric shaver motor,etc.
Contact us
Motor Manufacturing Solution
Email : emarketing@nide-group.com; marketing8@nide-group.com;
SNS