Welcome to visit Nide Corporation official website!

Products

Products
Home > Products >4 Stations Automatic rotor centrifugal aluminum casting machine

4 Stations Automatic rotor centrifugal aluminum casting machine

Model number:ND-90TB
Introduction:Comparing with the conventional automatic die casting machine, Our automatic rotor die casting machine is safety, healthy, power saving and labor cost saving.

Product video

  • Specification
  • Automatic centrifugal aluminum casting machine


    This rotor automatic centrifugal aluminum casting machine adopts four-station casting to improve production efficiency.

    The whole process is automated, reducing labor costs, only one operator required. Automatic get aluminium melt liquid, automatic loading and unloading the rotor, oven heating, manipulator reclaiming, four-station aluminum casting station, manipulator discharging, cooling assembly line, shaping station, discharging platform, automatic recycling and reuse of aluminum scraps.


    Safe and simple operation, it is very easy for operator to run the automatic centrifugal aluminum casting machine, operator only need to press "start" button, no need to handling the heavy tooling which might occur body injury, and the machine has aluminium anti spatter design to prevent the aluminium liquid from spraying and cause injury.


    Healthy, our rotor aluminum casting machine doesn't need asbestine cup to keep the temperature and demould.


    Power saving, and tooling cost is much less and fast tooling changeover. 


    Rotor loading: automatic pneumatic circularly pick up.


    Get aluminium melting liquid: servo motor control the mechanical arm, control the liquid volume through human-machine interface.


    Automatic cut the waste material, automatic recycle the cut wasted material and convey it to the furnace by the conveyor.


    Automatic feed mold releasing agent, the feeding time and times can be set.


    There is water cooling channel, helpful for reducing the mold temperature effectively.


    Setting on touch screen: forward and backward speed, stroke, swing angle of the mechanical arm, loading speed,etc.


    Machine will alarm and stop working if out of material.


    Failure will be automatic displayed and machine will alarm.


    Aluminum Casting Machine Technical Parameters


    No.ItemUnit90T specification

    1、Main cylinder:

    1main cylinder mold   lock forceKN500

    2main cylinder mold   lock travel mm400

    2、Injecting cylinder:

    1Injecting cyliner   travel mm150

    2Injecting cylinder   injecting force KN300

    3Injecting force(Min-Max)KN70-300

    4capacityL20

    5aluminum depot   OD(Max)mm75-90

    6punching head OD(Max)mm75-90

    7aluminum depot   capacity(Max)kg1.8

    8Injection punching   head travel distancemm55

    9cycle times15-20

    10Rotor ODmmMax 85

    11Rotor stack heightmmMax 90

    3、Motor and pump:

    1Pump motor powerKW7.5

    2Divider motor powderKW0.75

    3Oil pump (plunger   pump)L40Y

    4、Machine dimesion:

    1Main frame(L*W*G)mm1800*1800*2500

    2assembly of oil tank   and electric appliance(L*W*G)mm1500*1000*900

    3turntable ODmm1000

    5、Cooling pump specification:

    1Submersible pump   powerKW1.5

    2Submersible pump rate   of flowM3/H5

    3Submersible pump   water pressureMPa0.4


    Remark: the max   pressure of this machine is 25Mpa / Submersible pump  power 220/380V Optiona


    Aluminum Casting Machine Technical Picture


    aluminum die casting machine.jpg

    aluminum rotor die casting machine.jpg

    rotor aluminum die casting.jpg

    Automatic centrifugal aluminum casting machine.jpg


    Aluminum Casting Machine Video


    Contact us


    Motor Manufacturing Solution


    Email : emarketing@nide-group.com; marketing8@nide-group.com;


    SNS