Welcome to visit Nide Corporation official website!

Products

Products
Home > Products >Automatic double flyers armature Winding Machine

Automatic double flyers armature Winding Machine

Model number:ND-LAW-5B2F
Introduction:The automatic armature winding machine is suitable for armature coil winding with three shifts non-stop production. The armature winder could do twice winding in one slot, four times winding in the two adjacent slots.

Product video

  • Specification
  • Features

    The automatic armature winding machine is suitable for armature coil winding with three shifts non-stop production

    Three type coil winding mode: single slot - single hook, the single slot – double hooks, double layer winding; The armature winder could do twice winding in one slot, four times winding in the two adjacent slots. Total 100 sets parameter can be saved in the HMI as per the armature model No., during winding, the parameter can be dynamic displayed, including shift output, accumulate output, cycle time,etc.

    The HMI will automatically alarm if any abnormal happens during production.

    Single action, automatic and stepping operation could be switched.

    stable swing type fixture, up and down protection mold, protect hooking

    automatic wire breaking treatment, can be set to be snap break, there are two sequences: winding firstly then break, break firstly then wind.

    Feeding method: cylinder feeding and manual feeding

     

    General technical features :

    1Automatic levelManually loading/unloading, auto winding.

    2Cycle timeAccording to the sample

    3Air pressure0.5-0.7MPa, Voltage3 phase380V AC±10%50/60HZ

    4Temperature: -1040℃,Humidity:4090%

    5The device is equipped with three color light tower to indicate the machine status.

    6The equipment adopts the quick tooling change-over design, which can realize quick change-over.

    7Different level password protection.

    8The air supply of all equipment must be connected with the air source processing device to ensure the air source quality. It has Low pressure alarm function.

    9Anti-rust treatment on the surface of equipment parts (blackening, electroplating, painting).

    10. The main equipment frame adopts welding frame, the upper side adopts aluminum profile and acrylic glass shape, and the host body color is air conditioner grey (RAL7035).

    11Each operation station is equipped with LED lighting.

    12The equipment has safety protection signs, safety parts are yellow, emergency stop button, operation warning signs.

    13The equipment is controlled by PLC and the touch screen is convenient for debugging.

    14.SpecificationHook type commutator, double - flyer winding,High speed heavy duty type

     

     

    Main specification

    Product name

    Armature rotor   coil winding machine

    Wire diameter

    0.25~1mm

    Armature O.D

    20~60 mm

    Armature stack   length

    10~60 mm

    Slot type

    straight slotNo more than 36 slots

    Armature slots   number

    Odd, even slot

    Counting Range

    0~99999

    Commutator   diameter

    18~40 mm

    Fly fork speed

    0~3000 rpm

    Indexing speed

    0~3000 rpm

    Action process:

    Single action,   automatic

    Air pressure

    4~6 Kg/cm2 ,0.5-0.7MPa

    Machine power

    4KW

    Temperature:

    -1040

    Humidity:

    4090%

    Power supply

    3phase 380V±10%    50/60 Hz

    Total weight

    about 1,180 Kg

    Dimension

    2000length)×1300width)×1800height mm3

    Production   efficiency

    800-900set/classcalculated based on 12slots 24hooks,   20turns

     

    The armature coil winder display

    armature winder coil coil winding machine

    The Internal structure of the rotor coil winding machine

    rotor winding machine 

    The rotor coil winding machine Winding mold

    automatic motor winding machine

    The armature coil winding machine youtube video

        

    About Motor armature manufacturing

    Motor armature / rotor manufacturing production assembly line including: shaft pressing machine, end cover pressing machine, commutator pressing machine, armature insulation paper inserting machine, armature winding machine, commutator hot stacking machine, armature wedge inserting machine and armature testing machine, ball bearing inserting machine, and worm shaft inserting, NIDE can supply and manufacture about then ,and all the process will be done by machine automatically. Operator only needs to do loading and unloading. 

    motor armature rotor manufacturing

    About NIDE

    Nide is to provide different kinds of motor manufacturing machinery, including stand along machine, fully-auto complete line for armature and stator production, and the motor assembly line.We can supply the full range of motor components such as commutator, ball bearing, carbon brush, insulation paper, shaft, magnet, fan, motor cover,etc.We also provide technical support and consulting, project support and turn-key service for some motor manufacturing.

    motor manufacturing machine

    Our machine's application

    Our machines are mainly applied to induction motors, BLDC motor, universal motor, three phase motor, single phase motor, AC motor, DC motor, such as washing machine motor, air conditioner motor, pump motor, cooler motor, alternator motor, fan motor, ceiling fan motor, compressor motor, power tool motor, vacuum cleaner motor, mixer motor,  series motor, electrical car motor, wheel hub motor, electric toothbrush motor, hair dryer motor, electric shaver motor,etc.

    Contact us


    Motor Manufacturing Solution


    Email : emarketing@nide-group.com; marketing8@nide-group.com;


    SNS