Welcome to visit Nide Corporation official website!

Products

Products
Home > Products > Stator Coil Pre-forming Machine

Stator Coil Pre-forming Machine

Model number: Z1XL1-200/210
Introduction:The pre-forming machine is used for stators which need to do the second time coil insertion. After forming, the coil will be expading and easy for the next time insertion.

Product video

  • Specification
  • The pre-forming machine is used for stators which need to do the second time coil insertion. After forming, the coil will be expanding and easy for the next time insertion. 


     (1)  Machine main function and characteristic

    • This machine adopts whole hydraulic system and PCL program.

    • This machine can adjust the forming stack length by changing washer.

    • Form the OD, and ID of the stator core coil without forming hang over to facilitate operator to put phase isolator.

    • After forming, there is no copper wire enamel broken or wire snap.

    • Changing a new tooling is easy and convenient.

    • Both slot paper and wedge should not be damaged or turned over. The stator should not be deformation or stator lamination should not be upward. There is no wire enamel broken.

    • Production capacity ≤15s/set (exclude loading/unloading time)

    • Primary qualification rate ≥99%, after rework, the rate ≥99.9%

    • This machine adopts safety grating protection system. Operator need to stand when operating.

    • Machine adopts two hands simultaneously start button to ensure safety.


    (2) Technical data

    • Stator ID: 30~140mm

    • Stator OD: Max. 210mm

    • Stack length: 20~200mm

    • Height of coil: 15~65mm

    • Displacement of cylinder: 20F

    • Power: 380V/50/60HZ   1.5KW

    • Machine weight: about 500kg

    • Machine dimension: (L)920*(W)1120*(H)2500mm

    • CE certificate

     

    (3) Application

    Apply to multi-layer stator winding insertion.

     

    (4)Picture show

    3-Small-type-Electric-motor-stator-coil-forming-and-shaping-machine93.jpg

    (5)The Stator Coil Pre-forming Machine working video

    About Motor stator manufacturing

    Motor stator manufacturing production assembly line including paper inserting machine, coil winding machine, coil winding inserting machine, lacing machine, forming machine and testing machine.NIDE can supply and manufacture about then ,and all the process will be done by machine automatically. Operator only needs to do loading and unloading. 

    stator manufacuturing machine

    About NIDE

    Nide is to provide different kinds of motor manufacturing machinery, including stand along machine, fully-auto complete line for armature and stator production, and the motor assembly line.We can supply the full range of motor components such as commutator, ball bearing, carbon brush, insulation paper, shaft, magnet, fan, motor cover,etc.We also provide technical support and consulting, project support and turn-key service for some motor manufacturing.

    motor manufacturing machine

    Our machine's application

    Our machines are mainly applied to induction motors, BLDC motor, universal motor, three phase motor, single phase motor, AC motor, DC motor, such as washing machine motor, air conditioner motor, pump motor, cooler motor, alternator motor, fan motor, ceiling fan motor, compressor motor, power tool motor, vacuum cleaner motor, mixer motor,  series motor, electrical car motor, wheel hub motor, electric toothbrush motor, hair dryer motor, electric shaver motor,etc.

    Contact us


    Motor Manufacturing Solution


    Email : emarketing@nide-group.com; marketing8@nide-group.com;


    SNS