Welcome to visit Nide Corporation official website!

Products

Products
Home > Products >Automatic armature rotor coil winding machine

Automatic armature rotor coil winding machine

Model number:ND-LAW-5B2B
Introduction:This armature winding machine is used for automatically hook type commutator armature winding, it is suitable for winding medium and big wire diameter armature.

Product video

  • Specification
  • (1) Application

    The motor armture winding machine is suitable for home appliance, car and power tool motor aramture


    (2) Technical Parameter:

    ItemSpecification
    Armature O.D range:20~60mm
    Armature slot:Even slot
    Commutator diameter:12~40mm
    Wire diameter:

    Magnetic hysteresis method: 0.16~0.55mm/

    Electric control method: 0.30~0.85mm

    Stack length:10~60mm
    Shaft diameter:3~17mm
    Shaft length:Less than 300mm
    Turn number:0~9999
    Winding speed:0~3000rpm
    Winding motor power:1.5KW* 2
    Angle detecting speed:0~3000rpm
    Angle detecting motor power:0.75KW*1
    Air supply pressure:4~6Kg/cm2
    The machine total power:4.0KW
    Voltage:Three phase AC380V50/60Hz
    Dimension:2000(length)X1300(width)X1800(height)mm
    Weight:1200Kg


    (3) Production efficiency of this machine
    Around 1000pcs/8 hours,it is only a rough idea, depends on the armature slots number and turn number.

    (4) The operation steps of this machine

    Load armature on the shuttle manually, press START button,shuttle will deliver the armature to the winding position, and automatic winding, indexing and wire cutting,after completing, the shuttle will take out the finished armature from winding position, operator unload the finished armature, one cycle is completed.

    (5) The armature coil winding machine show

    rotor-winding-machine

     armarture-winding-machine

    (6) The armature coil winding machine youtube video

    About Motor armature manufacturing

    Motor armature / rotor manufacturing production assembly line including: shaft pressing machine, end cover pressing machine, commutator pressing machine, armature insulation paper inserting machine, armature winding machine, commutator hot stacking machine, armature wedge inserting machine and armature testing machine, ball bearing inserting machine, and worm shaft inserting, NIDE can supply and manufacture about then ,and all the process will be done by machine automatically. Operator only needs to do loading and unloading. 

    motor armature rotor manufacturing

    About NIDE

    Nide is to provide different kinds of motor manufacturing machinery, including stand along machine, fully-auto complete line for armature and stator production, and the motor assembly line.We can supply the full range of motor components such as commutator, ball bearing, carbon brush, insulation paper, shaft, magnet, fan, motor cover,etc.We also provide technical support and consulting, project support and turn-key service for some motor manufacturing.

    motor manufacturing machine

    Our machine's application

    Our machines are mainly applied to induction motors, BLDC motor, universal motor, three phase motor, single phase motor, AC motor, DC motor, such as washing machine motor, air conditioner motor, pump motor, cooler motor, alternator motor, fan motor, ceiling fan motor, compressor motor, power tool motor, vacuum cleaner motor, mixer motor,  series motor, electrical car motor, wheel hub motor, electric toothbrush motor, hair dryer motor, electric shaver motor,etc.

    Contact us


    Motor Manufacturing Solution


    Email : emarketing@nide-group.com; marketing8@nide-group.com;


    SNS