Welcome to visit Nide Corporation official website!

Products

Products
Home > Products > Semi-auto Stator Coil Insertion Machine

Semi-auto Stator Coil Insertion Machine

Model number: QLB1-200/250
Introduction:This coil inserting machine can insert coil and wedge into stator slot at the same time. Machine is suitable for stators with low output but various model numbers. Different size stator production can be achieved by changing tooling.

Product video

  • Specification
  • This coil inserting machine can insert coil and wedge into stator slot at the same time. Machine is suitable for stators with low output but various model numbers. Different size stator production can be achieved by changing tooling. 


    (1)  Machine main function and characteristic

    • The machine insert coil and wedge simultaneously, coil insertion is controlled by servo motor system.

    • It is controlled by HMI, and machine can diagnose breakdown automatically.

    • Both copper wire and aluminium wire are applicable.

    • Production capacity ≤20s/set (exclude the man-hours for auxiliary work)

    • Primary qualification rate for copper wire ≥98%, after rework, the rate ≥99.5%

    •  Wire pushing height and stop time can be set in the HIM interface.

    • The machine has fixed foot and removable wheel.

    • Wedge should not be damaged, no burr in the surface, no movement or slide.

    • Wedge should not be damaged, no movement or slide. Copper wire should not be pull away from the paper.

    • The stator should not be deformation or stator lamination should not be upward.


    (2) Technical data:

    • Stator stack length: 10~200mm

    • Stator OD: Max. 300mm

    • Stator ID: 80~180mm

    • Tooling traveling distance: Max.110mm

    • Suitable wire material: copper/aluminium wire

    • Slot number: 8~48slots

    • Max. Slot filling rate: 80%

    • Power: 380V/50/60HZ 3Kw

    • Machine weight: about 350kg

    • Machine dimension: L1500*W680*1100mm

     

    (3) Application

    The semi-auto motor stator coil inserting machine is suitable for medium induction motor stator.

     

    About Motor stator manufacturing

    Motor stator manufacturing production assembly line including paper inserting machine, coil winding machine, coil winding inserting machine, lacing machine, forming machine and testing machine.NIDE can supply and manufacture about then ,and all the process will be done by machine automatically. Operator only needs to do loading and unloading. 

    stator manufacuturing machine

    About NIDE

    Nide is to provide different kinds of motor manufacturing machinery, including stand along machine, fully-auto complete line for armature and stator production, and the motor assembly line.We can supply the full range of motor components such as commutator, ball bearing, carbon brush, insulation paper, shaft, magnet, fan, motor cover,etc.We also provide technical support and consulting, project support and turn-key service for some motor manufacturing.

    motor manufacturing machine

    Our machine's application

    Our machines are mainly applied to induction motors, BLDC motor, universal motor, three phase motor, single phase motor, AC motor, DC motor, such as washing machine motor, air conditioner motor, pump motor, cooler motor, alternator motor, fan motor, ceiling fan motor, compressor motor, power tool motor, vacuum cleaner motor, mixer motor,  series motor, electrical car motor, wheel hub motor, electric toothbrush motor, hair dryer motor, electric shaver motor,etc.


    Contact us


    Motor Manufacturing Solution


    Email : emarketing@nide-group.com; marketing8@nide-group.com;


    SNS