
Automatic Armature Copper Wire Winding Machine
Model number:ND-LAW-5B4
Introduction:This armature winding machine is used for automatically hook type commutator armature winding, it is suitable for winding medium and big wire diameter armature.
- Specification
This armature winding machine is used for automatically hook type commutator armature winding, it is suitable for winding medium and big wire diameter armature. Automatic feeding, winding, indexing and wire cutting, only load and unload armature from material loader. Equipped with touch screen and PLC, winding parameter could be set and modified on the screen. We also have armature winding machine equipped with conveyor, operator only need to put several pieces of armature on the conveyor at one time, then machine will finish all the armatures automatically. Below parameter is our standard machine, we could produce machine according to customer's armature accordingly.
(1) Technical Parameter:
Item
Specification
Wire diameter
Magnetic hysteresis method:0.16~0.55mm
Electric control method:0.30~0.85mm
Armature O.D range
20~60mm
Stack length
20~60mm
Shaft diameter
3~17mm
Shaft length
Less than 300mm
Armature slot
Even slot
Turn number
0~9999
Commutator diameter
12~40mm
Winding speed
0~3000 rpm
Winding motor power
1.5KW * 2
Angle detecting speed
0~3000 rpm
Angle detecting motor power
0.75KW *1
Air supply pressure
4~6 Kg/cm2
The machine total power
4.0 KW
Voltage
Three phase AC380V50/60Hz
Weight
1180Kg
Dimension
2000(length)X1300(width)X1800(height)mm
(2) Production efficiency of this machine
Around 1000pcs/8 hours,it is only a rough idea, depends on the armature slots number and turn number.
(3) The operation steps of this machine
Load armature on the shuttle manually, press START button,shuttle will deliver the armature to the winding position, and automatic winding, indexing and wire cutting,after completing, the shuttle will take out the finished armature from winding position, operator unload the finished armature, one cycle is completed.
Automatic Armature Copper Wire Winding Machine video: https://youtu.be/ADADI3NongQ
About Motor armature manufacturing
Motor armature / rotor manufacturing production assembly line including: shaft pressing machine, end cover pressing machine, commutator pressing machine, armature insulation paper inserting machine, armature winding machine, commutator hot stacking machine, armature wedge inserting machine and armature testing machine, ball bearing inserting machine, and worm shaft inserting, NIDE can supply and manufacture about then ,and all the process will be done by machine automatically. Operator only needs to do loading and unloading.
About NIDE
Nide is to provide different kinds of motor manufacturing machinery, including stand along machine, fully-auto complete line for armature and stator production, and the motor assembly line.We can supply the full range of motor components such as commutator, ball bearing, carbon brush, insulation paper, shaft, magnet, fan, motor cover,etc.We also provide technical support and consulting, project support and turn-key service for some motor manufacturing.
Our machine's application
Our machines are mainly applied to induction motors, BLDC motor, universal motor, three phase motor, single phase motor, AC motor, DC motor, such as washing machine motor, air conditioner motor, pump motor, cooler motor, alternator motor, fan motor, ceiling fan motor, compressor motor, power tool motor, vacuum cleaner motor, mixer motor, series motor, electrical car motor, wheel hub motor, electric toothbrush motor, hair dryer motor, electric shaver motor,etc.
Contact us
Motor Manufacturing Solution
Email : emarketing@nide-group.com; marketing8@nide-group.com;
SNS