The automatic rotor die-casting machine is used for aluminum armature rotor 

(1) Machine main function and characteristic

• Automatic get aluminium melt liquid, automatic loading and unloading the rotor.

• Rotor loading: automatic pneumatic circularly pick up.

• Get aluminium melting liquid: servo motor control the mechanical arm, control the liquid volume through human-machine interface.

• Automatic cut the waste material, automatic recycle the cut wasted material and convey it to the furnace by the conveyor.

• Automatic feed mold releasing agent, the feeding time and times can be set.

• There is water cooling channel, helpful for reducing the mold temperature effectively.

• Setting on touch screen: forward and backward speed, stroke, swing angle of the mechanical arm, loading speed,etc.

• Machine will alarm and stop working if out of material.

• Failure will be automatic displayed and machine will alarm.

• One person can take care of more than one machine.

(2) Main technical data

• Max. mold closing stroke:150mm

• Pressing injection stroke: 50mm

• Hydraulic system working pressure: 10~25MPa

• Hydraulic motor power: 7.5kw

• Oil tank capacity: 350L

• Rotor stack length: ≤100mm

• Rotor OD: ≤100mm

• Pitch time ≤18~24s

• Change-over time: 20mins

• Upper Presser operation pressure: 40T

• Bottom presser operation pressure: 15T

• Working pressure of oil cylinder: ≤21Mpa

• Power: 380V  50/60Hz  3.75KW

• Machine weight: 2500kg

• Deminsion: 970mm(L)*920mm(W)*2300mm(H)

About Motor armature manufacturing

Motor armature / rotor manufacturing production assembly line including: shaft pressing machine, end cover pressing machine, commutator pressing machine, armature insulation paper inserting machine, armature winding machine, commutator hot stacking machine, armature wedge inserting machine and armature testing machine, ball bearing inserting machine, and worm shaft inserting, NIDE can supply and manufacture about then ,and all the process will be done by machine automatically. Operator only needs to do loading and unloading. 

About NIDE

Nide is to provide different kinds of motor manufacturing machinery, including stand along machine, fully-auto complete line for armature and stator production, and the motor assembly line.We can supply the full range of motor components such as commutator, ball bearing, carbon brush, insulation paper, shaft, magnet, fan, motor cover,etc.We also provide technical support and consulting, project support and turn-key service for some motor manufacturing.

Our machine's application

Our machines are mainly applied to induction motors, BLDC motor, universal motor, three phase motor, single phase motor, AC motor, DC motor, such as washing machine motor, air conditioner motor, pump motor, cooler motor, alternator motor, fan motor, ceiling fan motor, compressor motor, power tool motor, vacuum cleaner motor, mixer motor,  series motor, electrical car motor, wheel hub motor, electric toothbrush motor, hair dryer motor, electric shaver motor,etc.

Contact us

Motor Manufacturing Solution

Email : emarketing@nide-group.com; marketing8@nide-group.com;

SNS