Copper Motorcycle Starter Carbon Brush 6.5*8.5*12mm 

The motorcycle starter carbon brush is made of a copper and carbon alloy , are in housings on the endplate of the starter. There are usually four brushes; occasionally two.Most starter motors have to be removed and partly dismantled to inspect or replace brushes. 

The graphite carbon brush is suitable For Motorcycle Starter Motor, power tools, home appliance, automobile, industry,etc.

Carbon Brush Structure 

The installation direction of the brush of the graphite brush is: radial type, back tilt and front -tilt. In the commonly used radial structure, the pressure of the spring is also different. There are mainly nest line springs, spiral springs, and stretch spring. These three spring pressing methods are to directly act on the brush by the pressure of the spring.

Carbon Crush Parameters

Carbon Brush Type

Natural graphite brush: such brushes have a high contact voltage, good rectification performance, low -flow performance is lower than the electrical graphite brush, good lubrication performance, and used for high lines with high line speeds It

Resin bonding graphite brush: This type of brush is characterized by large resistance, reduced contact voltage, good conversion performance, antioxidant, and abrasion resistance is ideal, but the power consumption is mostly used to AC streaming motors.

Carbon Brush Picture

We have a wide range of carbon brush. Our carbon brush has a wide application, such as automotive industry, household appliances, hammers, planers and etc. We directly supply our carbon brushes to many countries. We could customize carbon brush for our customer.

About Motor component and  accessories

NIDE can supply the full range of electric motor components such as commutator, ball bearing, thermal protector, carbon brush, insulation paper, shaft, magnet, fan, motor cover,etc.

Contact us

Motor Manufacturing Solution

Email : emarketing@nide-group.com; marketing8@nide-group.com;

SNS