中文版
English
Fully automatic aluminium rotor die-casting line solution
Model number:ND-100TB
Introduction:The aluminium rotor die-casting line is suitable for casting aluminum of various types of motor rotors, and can realize the integrated production of fully automatic rotors.
- Specification
Fully automatic aluminium rotor die-casting line solution
The aluminium rotor die-casting line is suitable for casting aluminum of various types of motor rotors, and can realize the integrated production of fully automatic rotors.
The aluminium rotor die-casting line is easy to operate. It only takes one day for green hands becoming practician. It takes about 10min to change mould. It is high working efficiency and equipped with 4 aluminium casting stations , 300-500pcs/hour.
During die casting, machine will transfer the residual aluminium to the aluminium furnace in time automatically. Since the residual aluminium still has a high temperature. It is saving time, cost and high security.
Aluminium Rotor Die-Casting Line Application
The aluminium rotor die-casting line is suitable motor aluminium rotor manufacturing. Especially suitable for induction motors, brushless motors, synchronous motors, permanent magnet motors, compressors, washing machines, etc.
Aluminium Rotor Manufacturing Process
Manually loose lamination weighing→ Putting truss into turntable→ Robot loading→ Into tooling→ Die-casting→ Casted rotor out of tooling→ Putting into integrated machine→ Weighing, marking codes, inspecting and stamping→ Putting into pressing machine→ False shaft pulling out→ Oil spraying→ Pick and load real shaft→ Putting pressure head→ Pressing real shaft→ Taking out pressure head→ Unload rotor to finished box
AluminIum Rotor Die Casting Line Technical Parameters
一、Specification No. Item Unit 100T specification 1、Main cylinder： 1 main cylinder mold lock force KN 630 2 main cylinder mold lock travel mm 400 2、Injecting cylinder： 1 Injecting cylinder travel mm 150 2 Injecting cylinder injecting force KN 400 3 Injecting force（Min-Max） KN 70-400 4 capacity L 25 5 aluminum depot OD(Max) mm 100 6 punching head OD(Max) mm 100 7 aluminum depot capacity(Max) kg 2 8 Injection punching head travel distance mm 60 9 cycle time s 15-20 10 Rotor OD mm Max 100 11 Rotor stack height mm Max 100 3、Motor and pump： 1 Pump motor power KW 7.5+7.5 2 Divider motor powder KW 1.5 3 Oil pump (plunger pump) L 40Y+40Y 4、Machine dimension： 1 Main frame（L*W*G） mm 2000*2100*2700 2 assembly of oil tank and electric appliance（L*W*G） mm 2100*1500*1500 3 turntable OD mm 1000 5、Cooling pump specification： 1 Submersible pump power KW 1.5 2 Submersible pump rate of flow M3/H 5 3 Submersible pump water pressure MPa 0.4 Remark: the max pressure of this machine is 25Mpa / Submersible pump power 220/380V Option 
Fully automatic aluminium rotor die-casting line video
Contact us
Motor Manufacturing Solution
Email : emarketing@nide-group.com; marketing8@nide-group.com;
SNS
