Welcome to visit Nide Corporation official website!
Products
Home > Products > Double Stations 36 slot stator Needle Winding Machine

Double Stations 36 slot stator Needle Winding Machine

Model number:ND-S2W01B
Introduction:1.The needle winding machine is Mainly used for multi-pole BLDC stator winding. 2.Each action cycle can wrap 2 stators, greatly improving the production efficiency. 3.During the stator winding process, manually feeding, automatic clamping mold, than reduce the labor intensity.

Product video

  • Specification
  • Product Induction

    1.The needle winding machine is Mainly used for multi-pole BLDC stator winding.

    2.Each action cycle can wrap 2 stators, greatly improving the production efficiency.

    3.During the stator winding process, manually feeding, automatic clamping mold, than reduce the labor intensity.

    4.The stator coil winding process can realize Multiple taps (screen setting), wire clamping and wire cutting.

    5.All aluminum alloy (anodizing treatment) plus imported acrylic protection.

    6.The number of slots and cycles can be set through man-machine interface.

    7. Electrical control, setting and display by PLC, display and servo motor are safe and reliable.

     

    Functions  and Characteristics

    1.For multi-pole stator winding, manual loading and unloading, automatic clamping, winding and shearing;

    2.Tooling and fixture parts adopt downward positioning mode, stable positioning and reliable tightening.

    3.Wire clamping and wire cutting, line part structure compact, wire clamping and wire cutting is completed at one time;

    4.Can quickly replace different types of molds; (experienced in 20 minutes to complete)

    5.Different stator and winding parameters can be quickly switched through the HMI to adapt to the requirements of different stators.

    6.The machine fame adopts National Standard 4040 aluminum profile, the table board adopts Q235.

    7.Full aluminum alloy protection

    8.PLC control.

    9.Fault display function.

     

    Technical Parameters:

    Stator ID: φ25—φ60mm  (Other specifications can be specially designed)

    Stator OD: φ60—φ200 mm (Other specifications can be specially designed)

    Stack length:10-80mm(Standard stroke)

    Wire diameter: φ0.13—φ1.2mm(Other specifications can be specially designed)

    Applicable pole number: multi-pole.

    Servo mechanism: One 3KW Indexing Motor

                                     One 3KW Winding Motor with Brake

                                     750W and 2 wiring motor

    Voltage:380V/50HZ Three phase four wires

    Spindle speeds:0---260 RPM adjustable

    Air pressure:0.5---1MPa

    Power: 10KW

    Dimension:1100*1300*1700mm(length * width * height)

    Weight:500KG

     

    Technical requirements to be achieved by products:

    Winding method:It is based on the pattern of winding and the object.

    The line is loose and tight, no injury, no breakage, ect.

    The product is tested in brine within 10 Ma per minute.

    Equipment safety index: accord with CE standard.

    Cycle time:Depending on the winding parameters

    Noise:Below 60-70 decibels

    /ueditor/php/upload/image/20191210/Automatic-DD-motor-stator-in-slot-winding-machine-needle-coil-winder-machine92.jpg

    BLDC motor winding machine automatic stator coil winder

    The needle winding macine youtube video

       

    About Motor stator manufacturing

    Motor stator manufacturing production assembly line including paper inserting machine, coil winding machine, coil winding inserting machine, lacing machine, forming machine and testing machine.NIDE can supply and manufacture about then ,and all the process will be done by machine automatically. Operator only needs to do loading and unloading. 

    stator manufacuturing machine

    About NIDE

    Nide is to provide different kinds of motor manufacturing machinery, including stand along machine, fully-auto complete line for armature and stator production, and the motor assembly line.We can supply the full range of motor components such as commutator, ball bearing, carbon brush, insulation paper, shaft, magnet, fan, motor cover,etc.We also provide technical support and consulting, project support and turn-key service for some motor manufacturing.

    motor manufacturing machine

    Our machine's application

    Our machines are mainly applied to induction motors, BLDC motor, universal motor, three phase motor, single phase motor, AC motor, DC motor, such as washing machine motor, air conditioner motor, pump motor, cooler motor, alternator motor, fan motor, ceiling fan motor, compressor motor, power tool motor, vacuum cleaner motor, mixer motor,  series motor, electrical car motor, wheel hub motor, electric toothbrush motor, hair dryer motor, electric shaver motor,etc.

    Contact us


    Motor Manufacturing Solution


    Email : emarketing@nide-group.com; marketing8@nide-group.com;


    SNS