中文版
English
Semi-Auto Rotor Dynamic Balancing and weight remove Machine
Model number:ND-SXST-1A-II
Introduction:This machine is used to do armature weight balancing. The method is weight remove.
- Specification
(1) Machine function and characteristic
This machine is used to do armature weight balancing. The method is weight remove. Automatic measure, and manually load to weight removing position, the machine automatic remove the weight, then manually load to re-measure.
(2)Technical Parameter:
Items
Details
Type
Two-station(single-tool/double-tools)
Rotor radius
Motor rotor below 1.6KG
Stack height :20-70mm
Rotor diameter: Φ20-45mm, 40-70mm
Balancing speed
1600-2100rpm
Milling method
R-shape or V-shape
Power
AC380V
Air supply
0.4~0.6Mpa
Initial unbalance
In accordance with difference of rotor radius and cutting depth,
for example, the max single cut on diameter of 32mm≤500mg, the max single cut on diameter of 40mm ≤800mg
Processing
cycle time(type Ⅱ)
12-16s(testing, milling from side to side)
Starter armature 25s
One time cutting qualified rate
≧90%
Max removing volume
≧90%
Imbalance repeat measuring precision
≤0.5g.mm （±5mg)
Fixture changing time
Same armature O.D ≤5 mins
Different armature O.D ≤ 15 mins
Residual unbalance
eccentricity
Better than the national standard for Grade 6.3
Volume
(length x width x height)
1300 x 1000 x 1300 mm
(3) Application
It is suitable for home appliance, car and power tool motor aramture.
The semi auto armature rotor dynamic balancing machine picture
About Motor armature manufacturing
Motor armature / rotor manufacturing production assembly line including: shaft pressing machine, end cover pressing machine, commutator pressing machine, armature insulation paper inserting machine, armature winding machine, commutator hot stacking machine, armature wedge inserting machine and armature testing machine, ball bearing inserting machine, and worm shaft inserting, NIDE can supply and manufacture about then ,and all the process will be done by machine automatically. Operator only needs to do loading and unloading.
About NIDE
Nide is to provide different kinds of motor manufacturing machinery, including stand along machine, fully-auto complete line for armature and stator production, and the motor assembly line.We can supply the full range of motor components such as commutator, ball bearing, carbon brush, insulation paper, shaft, magnet, fan, motor cover,etc.We also provide technical support and consulting, project support and turn-key service for some motor manufacturing.
Our machine's application
Our machines are mainly applied to induction motors, BLDC motor, universal motor, three phase motor, single phase motor, AC motor, DC motor, such as washing machine motor, air conditioner motor, pump motor, cooler motor, alternator motor, fan motor, ceiling fan motor, compressor motor, power tool motor, vacuum cleaner motor, mixer motor, series motor, electrical car motor, wheel hub motor, electric toothbrush motor, hair dryer motor, electric shaver motor,etc.
Contact us
Motor Manufacturing Solution
Email : emarketing@nide-group.com; marketing8@nide-group.com;
SNS
