Products
Model :NDPJ-CW-9
Brief Introduction : Magnets for general dynamo and standard motors are based on Y30H-2 matericals. Its main features: there is a hole in the center of the magnets;easy to install; stable performance.
Magnets for general dynamo and standard motors are based on Y30H-2 matericals. Its main features: there is a hole in the center of the magnets;easy to install; stable performance.
Physical characteristics of permanent ferrite& technical property
Item | Symbol | Unit | Value | Note |
Temperature range | — | ℃ | -40~+80 | |
Expand coefficient | αR | K-1 | 7~15X10-6 | |
Density | d | g/cm³ | 4.5~5.1 | |
Resistivity | p | Ω·cm | 104 ~ 108 | |
Curie temperature | θc | ℃ | 460~480 | |
Temperature coefficient of remanence | αBr | K-1 | -(0.18~0.20)% | 0~100 |
Temperature coefficient of coercive force | αHCJ | K-1 | (0.20~0.50)% | 0~100 |
Recoil permeability | μ | — | 1.05~1.30 | |
Hardness | Hv | — | 480~580 |
Ferrite Magnet Grade Equivalent
Item | Grade | Br T(GS) | HCB kA/m(kOe) | HCJ kA/m(kOe) | (BH) max kJ/m³(MGOe) |
IEC standard
IEC60404-8-1: 2001
| Hard ferrite 32/25 SI-1-9 | ≥0.41 | ≥240 | ≥250 | ≥32.00 |
≥4100 | ≥3016 | ≥3142 | ≥4.02 | ||
Hard ferrite 24/35 SI-1-10 | ≥0.36 | ≥260 | ≥350 | ≥24.00 | |
≥3600 | ≥3267 | ≥4398 | ≥3.02 | ||
Hard ferrite 25/38 SI-1-12 | ≥0.38 | ≥275 | ≥380 | ≥25.00 | |
≥3800 | ≥3456 | ≥4775 | ≥3.14 | ||
Hard ferrite 31/30 SI-1-13 | ≥0.41 | ≥295 | ≥300 | ≥31.00 | |
≥4100 | ≥3707 | ≥3770 | ≥3.896 | ||
NIDE Standard
Q/74690217-4.1-2004
| JC-Y3932 | 0.380-0.400 | 230-275 | 235-290 | 27.8-32.5 |
(3800-4000) | (2890-3456) | (2953-3644) | (3.49-4.10) | ||
JC-Y3939 | 0.385-0.4000 | 270-290 | 280-320 | 28.5-31.8 | |
(3800-4000) | (3391-3644) | (3518-4021) | (3.58-4.00) | ||
JC-Y4041 | 0.395-0.415 | 275-295 | 310-340 | 28.2-32.0 | |
(3950-4150) | (3456-3707) | (3895-4272) | (3.54-4.02) | ||
JC-Y4127 | 0.400-0.424 | 200-225 | 205-228 | 30.0-33.6 | |
(4000-4240) | (2514-2827) | (2577-2865) | (3.77-4.22) | ||
JC-Y4231 | 0.410-0.430 | 220-260 | 255-270 | 31.8-35.5 | |
(4100-4300) | (2765-3267) | (2827-3391) | (4.00-4.46) | ||
JC-Y3744 | 0.360-0.380 | 265-288 | 330-360 | 24.0-28.0 | |
(3600-3800) | (3330-3620) | (4147-4524) | (3.02-3.53) | ||
JC-Y3849 | 0.370-0.390 | 271-305 | 370-400 | 26.0-30.2 | |
(3700-3900) | (3405-3833) | (4649-5026) | (3.27-3.80) | ||
JC-Y4240 | 0.410-0.430 | 291-314 | 306.1-330 | 32.0-35.4 | |
(4100-4300) | (3657-3946) | (3846-4147) | (4.02-4.45) |
Information needed for magnet inquiry
It will be better if customer could send us detailed drawing including below information.
1. Magnet drawing
2. Magnet material
2. Magnet dimension: width, thickness, tolerance.
3. Magnet grade
4. Magnet applications
5. Required quantity: normally its weight or quantity
6. Other technical requirement.
If you are not sure which grade is proper, please contact our engineer. We can also customize according to your needs
We can offer a variety of NdFeB Magnet and Ferrite Magnet, If you need special magnetic tiles, we can also customize according to your needs.
About Motor component and accessories
NIDE can supply the full range of electric motor components such as commutator, ball bearing, thermal protector, carbon brush, insulation paper, shaft, magnet, fan, motor cover,etc.
Copyright © Ningbo Nide Mechanical Equipment Co., Ltd.
