Products

Full Automatic Aluminum rotor Die-casting Line

Model :ND-100TA

Brief Introduction : The Aluminum rotor Die-casting Line is suitable for rotor die-casting of multiple motors and matches to fully automatic rotor production line.

Full Automatic Aluminum rotor Die-casting Line

The Aluminum rotor Die-casting Line is suitable for rotor die-casting of multiple motors and matches to fully automatic rotor production line.Aluminum rotor die casting Line adopts 4 working stations.

Aluminum die casting process

Manually loose lamination weighing→ Putting truss into turntable→ Robot loading→ Into tooling→ Die-casting→ Casted rotor out of tooling→ Putting into integrated machine→ Weighing, marking codes, inspecting and stamping→ Putting into pressing machine→ False shaft pulling out→ Oil spraying→ Pick and load real shaft→ Putting pressure head→ Pressing real shaft→ Taking out pressure head→ Unload rotor to finished box

Aluminum rotor die casting line Advantage

a. labor cost saving, only one operator required, the aluminum scrap automatic recycle.

b. safe, it is very easy for operator to run the machine, operator only need to press "start" button, no need to handling the heavy tooling which might occur body injury, and the machine has aluminum anti spatter design to prevent the aluminum liquid from spraying and cause injury.

c. Healthy, our machine doesn't need asbestine cup to keep the temperature and demould

d. Power saving, and tooling cost is much less and fast tooling changeover.

etc

Aluminum rotor die casting line Technical Parameters

一、Specification
No.	Item	Unit	100T specification
1、Main cylinder：
1	main cylinder mold lock force	KN	630
2	main cylinder mold lock travel	mm	400
2、Injecting cylinder：
1	Injecting cylinder travel	mm	150
2	Injecting cylinder injecting force	KN	400
3	Injecting force（Min-Max）	KN	70-400
4	capacity	L	25
5	aluminum depot OD(Max)	mm	100
6	punching head OD(Max)	mm	100
7	aluminum depot capacity(Max)	kg	2
8	Injection punching head travel distance	mm	60
9	cycle time	s	15-20
10	Rotor OD	mm	Max 100
11	Rotor stack height	mm	Max 100
3、Motor and pump：
1	Pump motor power	KW	7.5+7.5
2	Divider motor powder	KW	1.5
3	Oil pump (plunger pump)	L	40Y+40Y
4、Machine dimension：
1	Main frame（LWG）	mm	200021002700
2	assembly of oil tank and electric appliance（LWG）	mm	210015001500
3	turntable OD	mm	1000
5、Cooling pump specification：
1	Submersible pump power	KW	1.5
2	Submersible pump rate of flow	M³/H	5
3	Submersible pump water pressure	MPa	0.4
Remark: the max pressure of this machine is 25Mpa / Submersible pump power 220/380V Option

Aluminum rotor Die-casting Line.jpg

automatic aluminum rotor die casting line.jpg

rotor Aluminum Die-casting Line.jpg

automatic rotor die casting line.jpg

Contact us

Motor Manufacturing Solution

Email : emarketing@nide-group.com; marketing8@nide-group.com;

SNS