Products
Model :ND-WGK-2XB
Brief Introduction : The automatic armature finish turning machine is used for DC electric motor armature commutator surface finishing.
The DC motor armature finish turning machine is use for armature commutator turning and it can turn and brush the rotor simultaneously.
(1) Introduction and features
Manual load/unload of armature into the turning and brushing stations.
Armature commutator turning and brushing the rotor at the same time
Servo motor drive controls armature rotation.
Robust, vibration-free base and tooling mounting surfaces.
Complete control of belt speed for correct cutting surface speed.
Supporting Clockwise or counterclockwise rotation of armature during cutting.
High precision
Easy access for maintenance.
Low cost
Easy to operate
(2) Technical data:
| 1. Voltage | 240V+/- 10% |
| 2. Frequency | 50Hz |
| 3. Motor power | 750W（AOB71222、 Three phase 240 V、△ connection） |
| 4. Frequency converting power | 750W（2pole、single phase 240v） |
| 5. Control | PLC System |
| 6. Belt press time | 0.1s |
| 7. Cutting time | programmable |
| 8. Cutting speed | pneumatic adjustable |
| 9. Speed frequency range | 0－60Hz |
| 10. Air pressure | 0.5-0.7Mpa |
| 11. Armature shaft diameter range | f3－f16mm (according to customers’ requirement) |
| 12. Armature diameter range | 71~148mm |
| 13. Shaft length range | 290~490mm |
| 14. Cutter linear speed | 50m-1000m/Min |
| 15. Weight each cutting | 0.02－0.2mm |
| 16. Commutator Surface roughness | 0.25micron |
| 17. Rotor Surface roughness | 0.4micron |
| 18. Concentricity | ≤0.005mm |
| 19. Max cutting length | 100mm |
| 20. Machine dimension | 950mm×650mm×950mm |
| 21. Weight | 400Kgs |
(3) Application
The armature finish turning machine is used for DC electric motor armature commutator surface finishing.
(4) Picture show
1. The armature commutator turning process
2. Turning and brushing the rotor at the same time
3. Armature show after finish turning and brushing
About NIDE
Nide is to provide different kinds of motor manufacturing machinery, including stand along machine, fully-auto complete line for armature and stator production, and the motor assembly line.We can supply the full range of motor components such as commutator, ball bearing, carbon brush, insulation paper, shaft, magnet, fan, motor cover,etc.We also provide technical support and consulting, project support and turn-key service for some motor manufacturing.
Our machine's application
Our machines are mainly applied to induction motors, BLDC motor, universal motor, three phase motor, single phase motor, AC motor, DC motor, such as washing machine motor, air conditioner motor, pump motor, cooler motor, alternator motor, fan motor, ceiling fan motor, compressor motor, power tool motor, vacuum cleaner motor, mixer motor, series motor, electrical car motor, wheel hub motor, electric toothbrush motor, hair dryer motor, electric shaver motor,etc.
Contact us
Motor Manufacturing Solution
Email : emarketing@nide-group.com; marketing8@nide-group.com;
SNS
Copyright © Ningbo Nide Mechanical Equipment Co., Ltd.
