Products
Model :ND-LAW-5B2B
Brief Introduction : This armature winding machine is used for automatically hook type commutator armature winding, it is suitable for winding medium and big wire diameter armature.
(1) Application
The motor armture winding machine is suitable for home appliance, car and power tool motor aramture
(2) Technical Parameter:
| Item | Specification |
| Armature O.D range: | 20~60mm |
| Armature slot: | Even slot |
| Commutator diameter: | 12~40mm |
| Wire diameter: | Magnetic hysteresis method: 0.16~0.55mm/ Electric control method: 0.30~0.85mm |
| Stack length: | 10~60mm |
| Shaft diameter: | 3~17mm |
| Shaft length: | Less than 300mm |
| Turn number: | 0~9999 |
| Winding speed: | 0~3000rpm |
| Winding motor power: | 1.5KW* 2 |
| Angle detecting speed: | 0~3000rpm |
| Angle detecting motor power: | 0.75KW*1 |
| Air supply pressure: | 4~6Kg/cm2 |
| The machine total power: | 4.0KW |
| Voltage: | Three phase AC380V50/60Hz |
| Dimension: | 2000(length)X1300(width)X1800(height)mm |
| Weight: | 1200Kg |
(3) Production efficiency of this machine
Around 1000pcs/8 hours,it is only a rough idea, depends on the armature slots number and turn number.
(4) The operation steps of this machine
Load armature on the shuttle manually, press START button,shuttle will deliver the armature to the winding position, and automatic winding, indexing and wire cutting,after completing, the shuttle will take out the finished armature from winding position, operator unload the finished armature, one cycle is completed.
(5) The armature coil winding machine show
(6) The armature coil winding machine youtube video
About Motor armature manufacturing
Motor armature / rotor manufacturing production assembly line including: shaft pressing machine, end cover pressing machine, commutator pressing machine, armature insulation paper inserting machine, armature winding machine, commutator hot stacking machine, armature wedge inserting machine and armature testing machine, ball bearing inserting machine, and worm shaft inserting, NIDE can supply and manufacture about then ,and all the process will be done by machine automatically. Operator only needs to do loading and unloading.
About NIDE
Nide is to provide different kinds of motor manufacturing machinery, including stand along machine, fully-auto complete line for armature and stator production, and the motor assembly line.We can supply the full range of motor components such as commutator, ball bearing, carbon brush, insulation paper, shaft, magnet, fan, motor cover,etc.We also provide technical support and consulting, project support and turn-key service for some motor manufacturing.
Our machine's application
Our machines are mainly applied to induction motors, BLDC motor, universal motor, three phase motor, single phase motor, AC motor, DC motor, such as washing machine motor, air conditioner motor, pump motor, cooler motor, alternator motor, fan motor, ceiling fan motor, compressor motor, power tool motor, vacuum cleaner motor, mixer motor, series motor, electrical car motor, wheel hub motor, electric toothbrush motor, hair dryer motor, electric shaver motor,etc.
Contact us
Motor Manufacturing Solution
Email : emarketing@nide-group.com; marketing8@nide-group.com;
SNS
Copyright © Ningbo Nide Mechanical Equipment Co., Ltd.
