Upgraded version high efficiency customized motor  Dynamic armature balancing equipment rotor testing machine

(1)Applications: 

The armature balancing equipment is used to measure the armature's unbalance. Man-machine interface can show the unbalance with its angle and value. The control system includes single chip, PLC and a man-machine interface. 

The rotor balancing maching can measured Up to 35 different types of rotor

The rotor balancing machine is widely used in the motor field, such as wiper motor, vacuum cleaner motor, mixer motor, window lifter motor, condenser motor, power tool motor, DC motor, etc. 

(2)Why armature balancing test
 improve the quality of the rotor and its composition
 reduce noise
 reduce vibration
 Extend the service life of bearing components (bearings)
 reduce the user's discomfort, reduce product consumption.

(3) Machine function and characteristic

1.This armature balancing machine automatically measures the unbalancing amount of the armature, automatically stops  the armature at the unbalancing position

2.Imbalance point positioning automatically

3.No need to mark on the armature (such as reflective sheet, black mark an so on)

4.Low operation skill requirement to staff

5.Reduce the complexity of the machine operation

6.Operator needs to stick the balancing mud onto the unbalancing position manually. 

(4) Main technical data:

(5).Operating Ambient parameters
The armature balancing equipment can be used continually and normally in 72 hours under below condition when Ambient temperature is -5℃~45℃ and the Humidity is 83~95%RH(+40℃)or 68~74%RH(-15℃)

 
(6)Picture show

About Motor armature manufacturing

Motor armature / rotor manufacturing production assembly line including: shaft pressing machine, end cover pressing machine, commutator pressing machine, armature insulation paper inserting machine, armature winding machine, commutator hot stacking machine, armature wedge inserting machine and armature testing machine, ball bearing inserting machine, and worm shaft inserting, NIDE can supply and manufacture about then ,and all the process will be done by machine automatically. Operator only needs to do loading and unloading. 

About NIDE

Nide is to provide different kinds of motor manufacturing machinery, including stand along machine, fully-auto complete line for armature and stator production, and the motor assembly line.We can supply the full range of motor components such as commutator, ball bearing, carbon brush, insulation paper, shaft, magnet, fan, motor cover,etc.We also provide technical support and consulting, project support and turn-key service for some motor manufacturing.

Our machine's application

Our machines are mainly applied to induction motors, BLDC motor, universal motor, three phase motor, single phase motor, AC motor, DC motor, such as washing machine motor, air conditioner motor, pump motor, cooler motor, alternator motor, fan motor, ceiling fan motor, compressor motor, power tool motor, vacuum cleaner motor, mixer motor,  series motor, electrical car motor, wheel hub motor, electric toothbrush motor, hair dryer motor, electric shaver motor,etc.

Contact us

Motor Manufacturing Solution

Email : emarketing@nide-group.com; marketing8@nide-group.com;

SNS