Welcome to visit Nide Corporation official website!
Products
Home > Products >Five Working Station Armature Balancing Machine

Five Working Station Armature Balancing Machine

Model number: ND-XSR-5BL-III
Introduction:This armature balancing machine has five working station, two for balancing, two for testing, one for loading and unloading.

Product video

  • Specification
  • This armature balancing machine has five working station, two for balancing, two for testing, one for loading and unloading. 


    (1) Machine function and characteristic

    For this type of five stations Armature Balancing Machine, armature does not need to mark, directly put on the conveyor, there are 5 working stations: loading and unloading station, initial measuring station, left side cutting station, right side cutting station and remeasuring station. 


    (2) Technical Parameter

     

    Items

     

     

    Details

     

    Type

    Five-station

     

    Main

    components

    configuration

    Cylinder: SMC

    Actuating motor: Mitsubishi

    Sensor: KEYENCE,OMRON,CONTRINEX

    LCD Touch screen: KEYENCE

    Control PLC: KEYENCE KV-1000

    Stepping motor: Oriental Motor

     

    Armature apply range

    Armature below 1.6KG

    Stack height:15-60mm

    Armature diameter: Φ40-60mm

    Balancing speed

    1000-2200rpm

    Cutting method

    R-shape cutter

    Power

    AC380V

    Air supply

    0.4~0.6Mpa

    Initial unbalance

    According to armature radius and cutting depth

    Cycle time

    10S

    Residual unbalance

    eccentricity

    Better than the China national standard Grade 6.3

    Volume

    (length x width x height)

    2200 X1500X 1800 mm mm


    (3) Application

    It is suitable for home appliance, car and power tool motor aramture.


    The testing station of this balancing machine

    1468466900610692.jpg


    About Motor armature manufacturing

    Motor armature / rotor manufacturing production assembly line including: shaft pressing machine, end cover pressing machine, commutator pressing machine, armature insulation paper inserting machine, armature winding machine, commutator hot stacking machine, armature wedge inserting machine and armature testing machine, ball bearing inserting machine, and worm shaft inserting, NIDE can supply and manufacture about then ,and all the process will be done by machine automatically. Operator only needs to do loading and unloading. 

    motor armature rotor manufacturing


    About NIDE

    Nide is to provide different kinds of motor manufacturing machinery, including stand along machine, fully-auto complete line for armature and stator production, and the motor assembly line.We can supply the full range of motor components such as commutator, ball bearing, carbon brush, insulation paper, shaft, magnet, fan, motor cover,etc.We also provide technical support and consulting, project support and turn-key service for some motor manufacturing.

    motor manufacturing machine

    Our machine's application

    Our machines are mainly applied to induction motors, BLDC motor, universal motor, three phase motor, single phase motor, AC motor, DC motor, such as washing machine motor, air conditioner motor, pump motor, cooler motor, alternator motor, fan motor, ceiling fan motor, compressor motor, power tool motor, vacuum cleaner motor, mixer motor,  series motor, electrical car motor, wheel hub motor, electric toothbrush motor, hair dryer motor, electric shaver motor,etc.

    motor application