Welcome to visit Nide Corporation official website!
Products
Home > Products >Full automatic Four working stations 70T Aluminum rotor die casting machine

Full automatic Four working stations 70T Aluminum rotor die casting machine

Model number:ND-70T
Introduction:This rotor die casting machine is safety, healthy, power saving and labor cost saving.

Product video

  • Specification
  • Machine feature of rotor die casting machine

    Automatic get aluminium melt liquid, automatic loading and unloading the rotor.

    Rotor loading: automatic pneumatic circularly pick up.

    Get aluminium melting liquid: servo motor control the mechanical arm, control the liquid volume through human-machine interface.

    Automatic cut the waste material, automatic recycle the cut wasted material and convey it to the furnace by the conveyor.

    Automatic feed mold releasing agent, the feeding time and times can be set.

    There is water cooling channel, helpful for reducing the mold temperature effectively.

    Setting on touch screen: forward and backward speed, stroke, swing angle of the mechanical arm, loading speed,etc.

    Machine will alarm and stop working if out of material.

    Failure will be automatic displayed and machine will alarm.

    One person can take care of more than one machine.


    Comparing with the conventional die casting machine, Our automatic rotor die casting machine has following features.

     

    a. labor cost saving, only one operator required, the alumium scrap automatic recycle.

    b. safe, it is very easy for operator to run the machine, operator only need to press "start" button, no need to handling the heavy tooling which might occur body injury, and the machine has aluminium anti spatter design to prevent the aluminium liquid from spraying and cause injury.

    c. Healthy, our machine doesn't need asbestine cup to keep the temperature and demould

    d. Power saving, and tooling cost is much less and fast tooling changeover.

    etc


    Apart from the rotor die casting machine, we supply full range machines for stator and rotor manufacturing, such as stator coil winding machine, coil inserting machine, rotor assembly line, rotor turning machine, ect.

     

    一、Specification
    No.ItemUnit70Tspecification
    1、Main cylinder:
    1main cylinder mold   lock forceKN400
    2main cylinder mold   lock travel mm300
    2、Injecting cylinder:
    1Injecting cyliner   travel mm150
    2Injecting cylinder   injecting force KN300
    3Injecting force(Min-Max)KN70-300
    4capacityL16
    5aluminum depot   OD(Max)mm80
    6punching head OD(Max)mm80
    7aluminum depot   capacity(Max)kg1
    8Injection punching   head travel distancemm55
    9cycle times15
    10Rotor ODmmMax 80
    11Rotor stack heightmmMax 90
    3、Motor and pump:
    1Pump motor powerKW7.5
    2Divider motor powderKW0.2
    3Oil pump (plunger   pump)L40Y
    4、Machine dimesion:
    1Main frame(L*W*G)mm

    1700*1600*2200

    2assembly of oil tank   and electric appliance(L*W*G)mm

    1500*1000*900

    3turntable ODmm860
    5、Cooling pump specification:
    1Submersible pump  powerKW1.1
    2Submersible pump rate   of flowM3/H3.5
    3Submersible pump   water pressureMPa0.4
    Remark: the max   pressure of this machine is 25Mpa / Submersible pump  power 220/380V Optional