Welcome to visit Nide Corporation official website!
Products
Home > Products >Vertical type rotor balancing machine

Vertical type rotor balancing machine

Model number:ND-BPZDZ-1W-A
Introduction:This rotor balancing machine adopts a vertical type structure. The balancing method is drilling or milling.

Product video

  • Specification
  • This rotor balancing machine adopts a vertical type structure. The balancing method is drilling or milling. Touch screen can display the unbalance with its angle and value.  This machine can measure the armature's unbalance and do the unbalancing. 


    (1) Technical data

     

    Main  

    components  

    configuration

    Cylinder:   SMC

    Actuating   motor: Mitsubishi

    Sensor:   KEYENCE,OMRON,CONTRINEX

    Touch screen: KEYENCE

    Control   PLC: KEYENCE KV-1000

     

    Armature range

    Armature   below 30KG

    Armature   diameter: below 500mm

    Balancing   speed

    400-900rpm

    Milling method

    Drillig/Milling

    Power

    AC380V

    Air   supply

    0.4~0.6Mpa

     

    Min residual unbalance

    1gmm/kg

    Cycle   time

    30~60S

    Residual   unbalance

    eccentricity

    Better   than the China national standard Grade 6.3

    Volume

    1300   X 1000 X 1300 mm


    (2)Application

    This rotor balancing machine is suitable for big size armatures. The max rotor weight can be 30KG.

    About Motor armature manufacturing

    Motor armature / rotor manufacturing production assembly line including: shaft pressing machine, end cover pressing machine, commutator pressing machine, armature insulation paper inserting machine, armature winding machine, commutator hot stacking machine, armature wedge inserting machine and armature testing machine, ball bearing inserting machine, and worm shaft inserting, NIDE can supply and manufacture about then ,and all the process will be done by machine automatically. Operator only needs to do loading and unloading. 

    motor armature rotor manufacturing

    About NIDE

    Nide is to provide different kinds of motor manufacturing machinery, including stand along machine, fully-auto complete line for armature and stator production, and the motor assembly line.We can supply the full range of motor components such as commutator, ball bearing, carbon brush, insulation paper, shaft, magnet, fan, motor cover,etc.We also provide technical support and consulting, project support and turn-key service for some motor manufacturing.

    motor manufacturing machine

    Our machine's application

    Our machines are mainly applied to induction motors, BLDC motor, universal motor, three phase motor, single phase motor, AC motor, DC motor, such as washing machine motor, air conditioner motor, pump motor, cooler motor, alternator motor, fan motor, ceiling fan motor, compressor motor, power tool motor, vacuum cleaner motor, mixer motor,  series motor, electrical car motor, wheel hub motor, electric toothbrush motor, hair dryer motor, electric shaver motor,etc.

    motor application

    Contact us

    Manager: Annie    

    Tel :    0086-574-87295639

    Mob : 0086-13738869026    

    Email :  sales@nide-group.com; emarketing@nide-group.com

    Address:14-5, East Kemao Center, No.100 Xiangyun Road, Hi-tech District, Ningbo, China

    SNS