Welcome to visit Nide Corporation official website!
Products
Home > Products >Automatic rotor balancing correction machine

Automatic rotor balancing correction machine

Model number:ND-BDXDR-2WIV-A
Introduction:This rotor balancing correction machine is suitable for rotor to do balancing. Machine has testing station. Before, balancing, it will test the unbalancing volume. Then machine will do balancing accordingly.

Product video

  • Specification
  • This rotor balancing correction machine is suitable for rotor to do balancing. Machine has testing station. Before, balancing, it will test the unbalancing volume. Then machine will do balancing accordingly. 


    (1) Machine technial data

     

    Main

    components

    configuration

    Cylinder: SMC

    Actuating motor: Mitsubishi

    Sensor: KEYENCE,OMRON,CONTRINEX

    LCD Touch screen: KEYENCE

    Control PLC: KEYENCE KV-1000

    Stepping motor: Oriental Motor

     

    Armature apply range

    Armature below 3KG

    Stack height:30-100mm

    Armature diameter: Φ60-90mm

    Balancing speed

    1000-2200rpm

    Milling method

    R-shape or V-shape

    Power

    AC380V

    Air supply

    0.4~0.6Mpa

    Cycle time

    15-20s

    Residual unbalance

    eccentricity

    Better than the China national standard Grade 6.3

    Volume

    1150 X900X 1820 mm 


    (2) Application

    This rotor balancing machine is suitable for home appliance, car and power tool motor aramture.


    About Motor armature manufacturing

    Motor armature / rotor manufacturing production assembly line including: shaft pressing machine, end cover pressing machine, commutator pressing machine, armature insulation paper inserting machine, armature winding machine, commutator hot stacking machine, armature wedge inserting machine and armature testing machine, ball bearing inserting machine, and worm shaft inserting, NIDE can supply and manufacture about then ,and all the process will be done by machine automatically. Operator only needs to do loading and unloading. 

    motor armature rotor manufacturing


    About NIDE

    Nide is to provide different kinds of motor manufacturing machinery, including stand along machine, fully-auto complete line for armature and stator production, and the motor assembly line.We can supply the full range of motor components such as commutator, ball bearing, carbon brush, insulation paper, shaft, magnet, fan, motor cover,etc.We also provide technical support and consulting, project support and turn-key service for some motor manufacturing.

    motor manufacturing machine

    Our machine's application

    Our machines are mainly applied to induction motors, BLDC motor, universal motor, three phase motor, single phase motor, AC motor, DC motor, such as washing machine motor, air conditioner motor, pump motor, cooler motor, alternator motor, fan motor, ceiling fan motor, compressor motor, power tool motor, vacuum cleaner motor, mixer motor,  series motor, electrical car motor, wheel hub motor, electric toothbrush motor, hair dryer motor, electric shaver motor,etc.

    motor application