Welcome to visit Nide Corporation official website!
Products
Home > Products >Automatic Stator Coil Winding Machine

Automatic Stator Coil Winding Machine

Model number:RXL3-100
Introduction:

Product video

  • Specification
  • The stator coil winding machine is  suitable for high production capacity requirement,high slot filling rate,small slot opening stator coil winding. Equipped with four winding heads and eight operation stations, machine is of high efficiency. It could automatically put the coil into the transfer former orderly, 


    (1)Specification:

    Wire diameter: 0.19-1.2mm

    Swing diameter: 220mm

    Operation station: 8

    Winding head: 4

    Max Thickness of stator lamination: 100mm

    Max Stator ID: 160mm

    Max RPM: 2500rpm

    Air source: 0.4mpa

    Power supply: 380V- 50/60HZ


    (2) Application

    This machine is suitable for 2 poles. 4 poles, 6 poles coils winding.


    (3) Operator step 

    1.Power on the machine

    2.Thread wire this this motor

    3. Set the winding parameter in the touch screen

    4. Press the "start" button

    5. Machine will do winding process automatically

    6.After finishing the winding, machine will stop

    7.Take out the wire from the tooling. 


    Machine working station

    stator coil winding machine


    The 8 working stations stator winding machine working video


    About Motor stator manufacturing

    Motor stator manufacturing production assembly line including paper inserting machine, coil winding machine, coil winding inserting machine, lacing machine, forming machine and testing machine.NIDE can supply and manufacture about then ,and all the process will be done by machine automatically. Operator only needs to do loading and unloading. 

    stator manufacuturing machine

    About NIDE

    Nide is to provide different kinds of motor manufacturing machinery, including stand along machine, fully-auto complete line for armature and stator production, and the motor assembly line.We can supply the full range of motor components such as commutator, ball bearing, carbon brush, insulation paper, shaft, magnet, fan, motor cover,etc.We also provide technical support and consulting, project support and turn-key service for some motor manufacturing.

    motor manufacturing machine

    Our machine's application

    Our machines are mainly applied to induction motors, BLDC motor, universal motor, three phase motor, single phase motor, AC motor, DC motor, such as washing machine motor, air conditioner motor, pump motor, cooler motor, alternator motor, fan motor, ceiling fan motor, compressor motor, power tool motor, vacuum cleaner motor, mixer motor,  series motor, electrical car motor, wheel hub motor, electric toothbrush motor, hair dryer motor, electric shaver motor,etc.

    motor application

    Contact us

    Manager: Annie    

    Tel :    0086-574-87295639

    Mob : 0086-13738869026    

    Email :  sales@nide-group.com; emarketing@nide-group.com

    Address:14-5, East Kemao Center, No.100 Xiangyun Road, Hi-tech District, Ningbo, China

    SNS