Welcome to visit Nide Corporation official website!
Products
Home > Products >Automatic Armature Copper Wire Winding Machine

Automatic Armature Copper Wire Winding Machine

Model number:ND-LAW-5B4
Introduction:This armature winding machine is used for automatically hook type commutator armature winding, it is suitable for winding medium and big wire diameter armature.

Product video

  • Specification
  • This armature winding machine is used for automatically hook type commutator armature winding, it is suitable for winding medium and big wire diameter armature. Automatic feeding, winding,indexing and wire cutting, only load and unload armature from material loader. Equipped with touch screen and PLC, winding parameter could be set and modified on the screen. We also have armature winding machine equipped with conveyor, operator only need to put several pieces of armature on the conveyor at one time, then machine will finish all the armatures automatically. Below parameter is our standard machine, we could produce machine according to customer's armature accordingly.
     

    (1) Technical Parameter:

    Item

    Specification

    Wire diameter

    Magnetic hysteresis method:0.16~0.55mm

    Electric control method:0.30~0.85mm

    Armature O.D range

    20~60mm

    Stack length

    20~60mm

    Shaft diameter

    3~17mm

    Shaft length

    Less than 300mm

    Armature slot

    Even slot

    Turn number

    0~9999

    Commutator diameter

    12~40mm

    Winding speed

    0~3000 rpm

    Winding motor power

    1.5KW * 2

    Angle detecting speed

    0~3000 rpm

    Angle detecting motor power

    0.75KW *1

    Air supply pressure

    4~6 Kg/cm2

    The machine total power

    4.0 KW

    Voltage

    Three phase AC380V50/60Hz

    Weight

    1180Kg

    Dimension

    2000(length)X1300(width)X1800(height)mm

     

    (2) Production efficiency of this machine
    Around 1000pcs/8 hours,it is only a rough idea, depends on the armature slots number and turn number.
     
    (3) The operation steps of this machine
    Load armature on the shuttle manually, press START button,shuttle will deliver the armature to the winding position, and automatic winding, indexing and wire cutting,after completing, the shuttle will take out the finished armature from winding position, operator unload the finished armature, one cycle is completed.

     

    Automatic Armature Copper Wire Winding Machine video: https://youtu.be/ADADI3NongQ

    About Motor armature manufacturing

    Motor armature / rotor manufacturing production assembly line including: shaft pressing machine, end cover pressing machine, commutator pressing machine, armature insulation paper inserting machine, armature winding machine, commutator hot stacking machine, armature wedge inserting machine and armature testing machine, ball bearing inserting machine, and worm shaft inserting, NIDE can supply and manufacture about then ,and all the process will be done by machine automatically. Operator only needs to do loading and unloading. 

    motor armature rotor manufacturing

    About NIDE

    Nide is to provide different kinds of motor manufacturing machinery, including stand along machine, fully-auto complete line for armature and stator production, and the motor assembly line.We can supply the full range of motor components such as commutator, ball bearing, carbon brush, insulation paper, shaft, magnet, fan, motor cover,etc.We also provide technical support and consulting, project support and turn-key service for some motor manufacturing.

    motor manufacturing machine

    Our machine's application

    Our machines are mainly applied to induction motors, BLDC motor, universal motor, three phase motor, single phase motor, AC motor, DC motor, such as washing machine motor, air conditioner motor, pump motor, cooler motor, alternator motor, fan motor, ceiling fan motor, compressor motor, power tool motor, vacuum cleaner motor, mixer motor,  series motor, electrical car motor, wheel hub motor, electric toothbrush motor, hair dryer motor, electric shaver motor,etc.

    motor application

    Contact us

    Manager: Annie    

    Tel :    0086-574-87295639

    Mob : 0086-13738869026    

    Email :  sales@nide-group.com; emarketing@nide-group.com

    Address:14-5, East Kemao Center, No.100 Xiangyun Road, Hi-tech District, Ningbo, China

    SNS