Welcome to visit Nide Corporation official website!
Products
Home > Products >Automatic CNC Motor Coil Winding Machine

Automatic CNC Motor Coil Winding Machine

Model number:RX3A-550
Introduction: This machine is specially designed for multiple wire parallel coil winding such as alternator, servo motor and three phase motor.

Product video

  • Specification
  • This type of CNC coil winding machine is suitable for stators needs to do winding inserting by manual. The coil will be wound into the winding tooling then operator needs unload the coils mannually. 

     

    (1) Machine function and characteristic

    This machine is suitable for multi-connected and multi layer winding. It adopts special purpose controller which could set the function of arraying direction, winding start point, slow starting, slow ending, sides stop, auto width, auto reset, ect. There are twp alternate spindles to facilitate higer output. 


    (2) Main Technical parameter:

    • Swing diameter: ≤550mm

    • Effective length of tooling: ≤400mm

    • Wire head: 1pc

    • Max stack height: 300mm

    • Max stator OD: 210mm

    • Max RPM: 500RPM

    • Power supply: 220V/50/60Hz 2.2Kw

    • Air pressure: 0.4MPa

    • Weight: 300Kg

    • Dimension: 1360mm(L)*1300mm(W)*1280mm(H)


    (3) Application

    This machine is specially designed for multiple wire parallel coil winding such as fan motor, air conditioner motor, pump motor and three phase motor.


    Stator coil winding machine winding tooling: the coil be wound into the tooling shown as below page. 

    1468544937395967.jpg


    Automatic CNC Motor Coil Winding Machine winding video

    About Motor stator manufacturing

    Motor stator manufacturing production assembly line including paper inserting machine, coil winding machine, coil winding inserting machine, lacing machine, forming machine and testing machine.NIDE can supply and manufacture about then ,and all the process will be done by machine automatically. Operator only needs to do loading and unloading. 

    stator manufacuturing machine

    About NIDE

    Nide is to provide different kinds of motor manufacturing machinery, including stand along machine, fully-auto complete line for armature and stator production, and the motor assembly line.We can supply the full range of motor components such as commutator, ball bearing, carbon brush, insulation paper, shaft, magnet, fan, motor cover,etc.We also provide technical support and consulting, project support and turn-key service for some motor manufacturing.

    motor manufacturing machine

    Our machine's application

    Our machines are mainly applied to induction motors, BLDC motor, universal motor, three phase motor, single phase motor, AC motor, DC motor, such as washing machine motor, air conditioner motor, pump motor, cooler motor, alternator motor, fan motor, ceiling fan motor, compressor motor, power tool motor, vacuum cleaner motor, mixer motor,  series motor, electrical car motor, wheel hub motor, electric toothbrush motor, hair dryer motor, electric shaver motor,etc.

    motor application

    Contact us

    Manager: Annie    

    Tel :    0086-574-87295639

    Mob : 0086-13738869026    

    Email :  sales@nide-group.com; emarketing@nide-group.com

    Address:14-5, East Kemao Center, No.100 Xiangyun Road, Hi-tech District, Ningbo, China

    SNS